Vehicle window glass sealing strip
Before installing the glass, the vehicle doors and windows should be carefully removed from the notches, such as mortar, brick chips, wood blocks, etc., and the glass should be carefully aligned when placing the glass to ensure that the gaps on both sides are even, and correct and fix them in time , To prevent the collision from shifting away from the center of the notch. The rubber sealing strip cannot be pulled too tightly, and the blanking length is 20-30mm longer than the assembly length.
The mounting should be in place when installing, the surface should be straight, and it should be in close contact with the glass and the glass notch so that the force around the glass is even. At the corners, the rubber strips should be cut off at an inclined plane, and glue should be injected at the break to be firmly bonded. When sealing the glass with sealant, you should squeeze the glass with a rubber strip or block first to leave a gap for the glue. The depth of the glue should not be less than 5mm. Before the glue is cured, the glass should be kept from vibration.