Installation method of car door sealing strip
1. Wipe clean the sticking part;
2. Tear off the adhesive film of the sealing strip;
3. Paste the sealing strip to the installation position along the inner frame of the car;
4. Use scissors to cut off the excess tape.
note:
When pasting, make sure that the surrounding environment is dry and dust-free. If the climate temperature is lower than 10°C, it is best to use the hot air of a hair dryer to heat the vehicle installation part and the adhesive part of the sealing strip before pasting. At the same time, use the hot air of the hair dryer to heat it again after pasting it, and press it properly with your hands to ensure that it is firmly adhered; in order to ensure the reliability of later use, the sealing strip should be protected from rain and exposure within three days after installation.