How to install container sealing strip
1. Use a neutral detergent to wash away the rust on the installation part, and keep the dust and oil stains away from the door frame of the car.
2 To choose the right product to fit your own container door frame. It is necessary to accurately measure the thickness of the steel plate where the sealing strip is to be installed with a caliper, and choose the appropriate sealing strip for the van container to avoid unnecessary trouble.
3 is the installation step: you can put glue on the card out of the sealing strip first to make it stronger after installation. After applying the glue, buckle the sealing strip on the edge of the container door frame and snap it in and press it hard with your hands. Let the glue and the steel plate stick together, and rivet it at a place where the rivets are 50 cm together, so that the sealing strip and the steel plate of the door frame are combined into one.
4 The sealing strip that was installed at the beginning will be a little tight when the door is closed, and it can be used normally after 4-5 days.