How to install door and window seals

There are many types of seal strips, and the range of different seals is different. Therefore, when selecting the type of door and window seals, it must correspond to your own doors and windows, so that the doors and windows can be more tight. Pay attention when purchasing seals, choose non-toxic and tasteless environmental seals.

There are special sealing strips on the doors and windows and the beading. When installing the sealing strip, the notch debris should be carefully removed to ensure uniform gap on both sides. The mounting part must be flat, not stretched, not curled, and the joint should be less than 1MM. .

When the door and window and the frame fan are installed with the sealing strip, the strip is slowly pushed into the notch with the special roller in the correct orientation, and the strip is pressed downward to be embedded in the notch. In order to prevent the rubber strip from elastic retraction caused by the rolling pressure, pay attention to the installation, first retract the two ends of the strip to the middle, and then cut the embedding slot after the length of the strip.